Single/Multi – Layer Extruder Screen packs
We are the manufacturer of a wide range of Extruder Screen Packs such as : Single Layer Extruder Screen, Multilayer Extruder Screen Packs, Spin Pack Filters, With Or Without Spot Welded Or Frame Edges, Rubber Framed Extruder Screen, Tri-Clamp Screen Gaskets & Many More!!!
Single-layer / Multi-layer Extruder Screen packs
Extruder screens can be made with both one layer of wire mesh or multiple layers.
A single-layer is used when virgin material with few impurities is being processed.
Multilayer Extruder Screen packs are the different wire meshes cut to desired shapes and sizes, and then assembled properly and spot welded with each other to form multilayer packs.
Multi-layer is used when reground or recycled material is being used or when absolute cleanliness is a must. There is typically a more coarse protection layer that the melted polymer first comes in contact with.
This protects the finer filtration layer or layers from debris damage, pressure, or the swirling motion of the plastic melt. Another coarse layer faces the breaker plate to support and protect the finer mesh layer from being pushed into the breaker plate holes.
Configurations vary depending on a wide variety of factors, such as material type and cleanliness requirements, but extruder screens typically contain 2 to 5 layers.
That layer could be held together with spot welds, a rim-binder, welded with frame or the layers could simply be unsecured and stacked in the desired configuration.
This type of extruder screen is suitable for fine extrusion, and it makes extrusion more clean and clear.
Extruder Screen packs with Frame / Rim
Extruder Screen with Frame/Rim
Extruder screen packs feature spot-welded packs with an Aluminium or Stainless Steel rim added for extra rigidity and strength.
Rim / Frame Extruder screens can be made with both one layer of wire mesh or multiple layers.
These are excellent for use where the extruder screen filter is operating at high pressures or if there is a danger of contamination getting around the edge of the breaker plate.
This multilayer extruder screens packs are welded together at precise points. They are excellent for use in any filtration and assembled in proper sequence to eliminate operator error. The number and location of spot welds can be customized for your process.
Welded with Frame/Rim Extruder Screen Pack
Rubber Framed Extruder Screen pack
Rubber framed extruder screen possesses an elastic edge that make it become strong and stable. And the screens are more economical than the metal framed screens and also can be designed into a variety of shapes.
Flexible structure gives rubber framed extruder screen good strain resistance. What’s more, rubber framed extruder screens have excellent filtering ability in plastic extrusion, chemical fiber filtration, water treatment.
Tri-clamp screen gaskets are designed to be interchangeable with standard sanitary clamp gaskets to protect pump, values and other components in fluid line.
It has the widest ranges of mesh sizes for excellent and efficient particulates collection and filtration in water, acetones and ketones transmission.
EPDM, PTFE, viton and silicon gasket material options supply perfect performance in corrosive and chemical fluid transmission.
Product Specifications
Applications
EXTRUDER SCREEN PACKS play an important role in many applications.
Mainly used for filtration of Plastics and Rubber processing industry.
Mainly used for Plastic & Rubber Extrusion Industries for Polymer Filtration with precise mesh size to suits your machine requirement.
Reclamation of Plastic Waste:
The new plastic ‘raw’ material is gained by heating waste plastic and passing it through an extruder screen filter within a plastic extrusion machine.
The extruder screen filter removes contaminants such as paper, allowing the clean recycled plastic to be collected at the end of the process. This can then be manufactured into a new product which has reduced the negative impact of using new plastic material.
Extruded Profiles
Wire mesh extruder screen filters are extensively used in the extrusion of plastic profiles. Applications include UPVC window profiles, plastic tubing ranging from gutters to industrial utility pipes and custom made extrusions.
Other application like:
- Polyester Oriental Yarn.
- Polyester Stable Fibers.
- Polypropylene Yarn.
- Nylon and Acrylic Yarn.
- BCF Polypropylene Yarn.
- Polypropylene Spun bonded Non-woven Fabrics.
- Polyester fiber production.
- Chemical and Pharmaceutical industry.
- Oil and fuel filtration.
- Extrusion in lamination plants.
- Extrusion in Multilayer film plants.
Blown Film Extrusion
Extruder screen filters are used in the production of polythene bags, waste sacks and plain ‘cling’ film to name but a few. The wire mesh extrusion filters are an essential part of this process as they remove any remaining impurities in the plastic so that the end product does not have any flaws in it.
